Wind Blade Lifter

Overview

A blade lifter is a different machine from a blade trailer, not a more expensive version of one. Instead of carrying the blade at road level and steering around obstacles, it lifts the blade 5–12 m into the air and rotates it about the root through a full 360°, so the blade can be threaded over tree canopy, between buildings, past signage and under low lines that no ground-level combination can pass.

That capability changes which sites are buildable. A ridge site with a hairpin through forest, or a repowering job inside a village where the original turbines went up before the trees did, is often only reachable with a lifter — the alternative is road widening, tree felling and line re-routing, which is slower, more expensive and needs permits that may not be granted.

The lifter is a self-contained unit with its own hydraulic power pack, and it shares the root-clamp interface with the HEAVYLT blade trailer, so a fleet can cover both concepts with one clamp standard. Because the machine is a specialist asset, it is normally specified per project: send the blade envelope and the critical route sections and we will define the lift height and rotation envelope those sections actually require.

Key features

• Raises the blade 5–12 m — clears tree canopy, roofs, signage and low lines
• 360° rotation lets the blade be threaded vertically between obstacles
• Combined lift and rotation clears sections a ground-level trailer physically cannot pass
• Self-contained hydraulic power pack — no dependency on the prime mover's hydraulics
• Shares the root-clamp interface with the HEAVYLT blade trailer
• Reduces or removes the need for road widening, tree felling and line re-routing

Applications

• Forest and mountain access roads
• Village and urban sections on repowering projects
• Routes with low overhead lines or bridge structures
• Sites where road modification permits are unobtainable